Une rapide recherche sur Google n'a rien donné …
Ce site
https://uk.subaruownersclub.com/forums/topic/1682-get-audio-system-out-of-security/ mentionne un possible blocage d'un appareil passé d'un véhicule à un autre … mais cela ne couvrirait que l'un des deux cas et ils disent qu'un vendeur devrait pouvoir recoder l'auto-radio ???
Rien trouvé d'autre de pertinent. Désolé. Si je trouve, j'en parlerai ici et mettrai à jour mon post.
D'autres infos trouvées ici (il doit exister une procédure similaire pour nos appareils, mais elle ne figure pas dans le mode d'emploi

) :
http://www.uklegacy.com/forums/index.php?/topic/5635-code-for-kenwood-stereo/No Guarantees that this will work, but worth a try, Once activated this will prevent anybody from using the stereo if the power is disconnected.
To Activate:
1 Enter Standby (press the SRC button)
2 Enter menu mode
- Press the menu button for at least one second.
- When "Menu" is Displayed, "Security" is displayed.
3 Enter security code mode
- press the << or >> button for at least one second.
- When "enter" is displayed, "code" is displayed.
4 Select the digits to enter
- Press the << or >> button.
5 Select the Security Code Numbers
- Press the FM or AM button.
6 Repeat steps 4 and 5, and complete the security code
7 Confirm the security code
- Press the >> button for at least 3 seconds.
- When "re-enter" is displayed, "code" is displayed.
8 Do the steps 4 through 7 operation, and re-enter the security code.
- "approved" is displayed
- The security code function activates.
If the battery is disconnected you need to do steps 4 - 7 to activate the stereo.HTH, let me know if it works
Cheers David
En d'autres termes, si un code de sécurité a été défini, après débranchement de la batterie (ce qui est votre cas à tous les deux, pour une période plus ou moins longue), il faut réintroduire le code selon les points 4 à 7. N'ai-je pas de code ou jamais débranché assez longtemps le lecteur ???
Finalement, plus bas dans le post, le témoignage d'un propriétaire qui dit que son concessionnaire a dû faire reconnaître le nouvel autoradio par son véhicule et qu'ensuite c'était Ok … puis tout en bas, un témoignage qui parle du blocage avec "SECURITY" sur fond noir après 1 heure de fonctionnement, mais pas de réponse.
… ou encore
https://www.ecoustics.com/electronics/forum/car-audio/106618.html#POST292048KENWOOD SECURITY CODE CLEAR procedure
Your radio will require one of the following procedures.
Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that "..." disappears).
Then using your remote enter your code.
Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key "5" ( 2 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 3 times ) and press the Track UP/Next Track key
* Press numeric key "2" ( 1 time ) and press the Track UP/Next Track key
* Press numeric key "7" ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
https://www.ecoustics.com/electronics/forum/car-audio/106618.html#POST433770Ok you guys I just had a problem with a kvt715 being locked and I paid a site 40 dollars for this info,It does work the code is KCAR BUT its how you use the code whether it works or not the first thing you have to do is have a remote-Will not work without remote,....Turn on unit and the screen will come up for password..using remote press 5 two times,wait 2 seconds and press enter,NOT track up press 2 three times wait 2 seconds press enter,press 2 One time wait 2 seconds then enter and finally press 7 two times and press enter! your screen will be unlocked if you did it right,If you have to try again turn off and then back on.AGAIN the site I paid for this at says push track up but that did not work for me,Goodluck THIS WILLNOT WORK ON 911 unit.
… toujours pas pour nos postes, mais peut-être qqch à en tirer ?
Dernier point (peut-être ne l'as-tu pas vu dans mon post), nos appareils sont en fait des Kenwood KNA-DV3200 … essaie avec ça
